Machine

Model: ZT-KS-208FL2 1. Efficiently producing preform parts for Dual/Single color. 2. Industrial grade HMI Control system, for setting production condition precisely. 3. High-efficiency Double pump Hydraulic systems. 4. Proportional control valve, accurate and multi-stage control of pressure and flow volume. 5. Two-stage fast mold closing system, evenly clamping force protects and extends the mold using life. 6. Enhanced C Type mould holding unit, reduces the products flash. 7. High efficiency water cooling system. 8. Material stopping unit, avoids material over flow and controls volume precisely. 9. Volume control by Potentiometer to ensure products size stable.

Model: ZT-KS-177T12/18/24 1. Injection system 2. Mould clamping system 3. Controlling system 4. Hydraulic system 5. Accessories

Model: ZT-KS-9708L1 > Rubber Injection moulding products with more stable quality and less flash that saves material consumption. > Optional 3-4 plates mould is available for making multi-color products by inserting. > Less operation fatigue, saving labor cost; less noise and better working environment.

Model: ZT-KSC-8706HP - Fit in Ergonomic operation height, 862mm

Model: ZT-KS-7404TH1 Aimed at the shoe sole, Shoe Upper and Shoe Components market demands, for diversification, multi-color, multi-function and precision products, using PVC/TPR/TR material to produce various kind od products.

Model: ZT-KSC-910GPS2 - Two sides operation design.

Model: ZT-KS-220H2/H3 Utilizes high-torque hydraulic motor to drive screw: turning speed can be adjusted in accordance with the requirements of various materials.

Model: ZT-KSC-906UEC2 - Low operation height The operation height fits in with ergonomics. - Increased mould opening stroke By fixed mould opening stroke 350mm, it is not affected by any mould thickness changes and available for 3 plates mould. - Hydraulic cushion equipment Moulds thickness can be compensated for max. 2mm on one mould station to save mould correcting time. - Mould thickness adjusting mechanism Mould thickness 100-250mm can be adjusted stepless. - Rapid mould opening Act by toggle mechanism, it opens the mould rapidly. - Speedy injector movement Driven by linear-track allowing speedy moving and precise positioning. - Efficient vacuuming system -No need water circulation for mould station Using efficient heat insulation material.

Model: ZT-KSC-220TB2 - The Wider Space and Cooling System for moulds This model, with the unique constructional design, can accommodate the moulds od bigger size. Besides, the cooling system can simplify the operation and prefect the products. - Clamping System With two-slep high speed mold clamping system, the clamping force is even to protet and extend mould life. Equipped with strengthened C-type clamping mechanism, prevent products from having burr easily. - The Automatic High-Efficient Injector It is uniquely combined the moving cylinder & spin rod in the injector. Therefore the injection is very stable and efficient. - Controlling System The main control panel utilized human machine interface system to display the injection value pressure on line. It is allowing individual pressure control for each station.

Model: ZT-KSC-177T24 The machine is equipped with a high-efficiency injection set to combine high-performance mould clamping system with programmable logic and non-foaming PVC TPR material. Specializing in producing various kinds of slipper sandal and full plastic footwear.

Model: ZT-KSC-224TB2 The wider space and cooling system for moulds This model, with the unique constructional design, can accommodate the moulds of bigger size. Besides, the cooling system can simplify the operation and perfect the products.

Model: ZT-KS-7402FH2 Aimed at the shoe sole, Shoe upper and shoe components market demands, for diversification, multi-color, multi-function and precision products, using PVC, TPR, TR material to produce various kind of products.

Model: ZT-KSC-216FL3 Efficiently producing preform parts for dual/single color.

Model: ZT-KS-9804TL2 Rubber injection moulding products with more stable quality and less flash that saves material consumption.

Model: ZT-KS-908UE2 - Increased mould opening stroke By fixed mould opening stroke 350mm, it is not affected by any mould thickness changes and available for 3 plates mould. - Hydraulic cushion equipment Moulds thickness can be compensated for max. 2mm on one mould station to save mould correcting time. - Mould thickness adjusting mechanism Mould thickness 100-250mm can be adjusted stepless. - Rapid mould opening Act by toggle mechanism, it opens the mould rapidly. - Speedy injector movement Driven by linear-track allowing speedy moving and precise positioning. - Efficient vacuuming system -No need water circulation for mould station Using efficient heat insulation material.

Model: ZT-KS-216FL2 1. Efficiently producing preform parts for Dual/Single color. 2. Industrial grade HMI Control system, for setting production condition precisely. 3. High-efficiency Double pump Hydraulic systems. 4. Proportional control valve, accurate and multi-stage control of pressure and flow volume. 5. Two-stage fast mold closing system, evenly clamping force protects and extends the mold using life. 6. Enhanced C Type mould holding unit, reduces the products flash. 7. High efficiency water cooling system. 8. Material stopping unit, avoids material over flow and controls volume precisely. 9. Volume control by Potentiometer to ensure products size stable.

Model: ZT-KS-9910UE2 1) Low operation height The operation height fits in with ergonomics. 2) Increased mould opening stroke By fixed mould opening stroke 350mm, it is not affected by any mould thickness changes. 3) Mould thickness adjusting mechanism Mould thickness 100-350 mm can be adjusted stepless. 4) Rapid mould opening Act by toggle mechanism, it opens the mould rapidly. 5) Efficient vacuuming system 6) Energy-saving design Using efficient heat insulation material and no need water circulation for mould station. 7) Available for alternative of one and two-color production mode. 8) Mid-plate is functionally auto-removed. 9) Available for both injection and pouring process.

Model: ZT-KSC-520B1 Air blowing System Equipped with air blowing system, the produced products are light weight, soft with shining surface. The weight can be 20%-30% less than the products made in traditional way.

Model: ZT-KSC-904UEC2 Low operation height - The operation height fits in with ergomics

Model: ZT-KSC-224TB3 The wider space and cooling system for moulds

Model: ZT-KSC-220HB2 The wider space and cooling system for mould This model, with the unique constructional design, can accommodate the moulds of bigger size. Besides, the cooling system can simplify the operation and perfect the products.

Model: ZT-KS-910UE2 - Low operation height The operation height fits in with ergonomics. - Increased mould opening stroke By fixed mould opening stroke 350mm, it is not affected by any mould thickness changes and available for 3 plates mould. - Hydraulic cushion equipment Moulds thickness can be compensated for max. 2mm on one mould station to save mould correcting time. - Mould thickness adjusting mechanism Mould thickness 100-250mm can be adjusted stepless. - Rapid mould opening Act by toggle mechanism, it opens the mould rapidly. - Speedy injector movement Driven by linear-track allowing speedy moving and precise positioning. - Efficient vacuuming system -No need water circulation for mould station Using efficient heat insulation material.

Model: ZT-KS-7406TH1 Aimed at the shoe sole, Shoe Upper and Shoe Components market demands, for diversification, multi-function and precision products, using PVC/TPR/TR material to produce various kind of product.

Model: ZT-KSC-906GPS2 1) Two sides operation design. 2) Full closed vacuum space creates efficient vacuum performance that makes high quality and stable products. 3) No need water circulation for mould station, using efficient heat insulation material. 4) Space saving for factory 5) Moulding adjusting mechanism increases mold height design flexibility.

Model: ZT-KS-118T The machine is equipped with a high-efficiency injection set to combine high-performance mould clamping system with programmable logic controller, which can coordinate various kinds of moulds to use foaming and non-foaming PVC, TPR material. Specializing in producing various kinds of slipper, sandal and full plastic footwear.

Model: ZT-KS-908UE4 4 Injectors with more Flexible producing condition

Model: ZT-KSC-902UEC1 Low operation height The operation height fits in with ergonomics.

Model: ZT-KS-120T The machine is equipped with a high-efficiency injection set to combine high-performance mould clamping system with programmable logic controller, which can coordinate various kinds of moulds to use foaming and non-foaming PVC, TPR material. Specializing in producing various kinds od slipper, sandal and full plastic footwear.