Machine

Model: ZT-KS-908GH Reduce environment pollution and compound cost.

Model: ZT-KSC-520B1 Air blowing System, Equipped with air blowing system, the produced products are light weight, soft with shining surface. The weight can be 20%-30% less than the products made in traditional way.

Model: ZT-KSC-908LE2 Increased mould opening stroke, By fixed mould opening stroke 440mm, it is not affected by any mould thickness changes and available for 3 plates mould.

Model: ZT-SM-690B Automatic reciprocating and forward splitting, Saves transfer time of raw material. Increases productivity.

Model: ZT-SM-616 - Automatic band-knife adjustment : The front edge position of bandknife is monitored by a sensor and knife gets narrower while grinding.

Model: ZT-TS-721 Special device for splitting EVA one-PCs middle soles or rubber sole without changing roller. (front and rear thickness) and middle slope length can be adjusted.

Model: ZT-HC-369 Application : With precision independent heating temperature controlling system, the machine can set precision temperature while lamination task processing. The main function id to laminate fabric with EVA sheet by Hot-melt adhesive film.

Model: ZT-KS-7902DH2 Multi-Function Plastic Footwear Injection - Suitable for using TPU, TPR, TR, PVC materials.

Model: ZT-KS-118T2 Equipped with highly efficiency system to coordinate highly quality product

Model: ZT-KS-910UE4 4 Injectors with more Flexible producing condition The best choice for small order in various models and colors, increasing machine using rate and productivity.

Model: ZT-SM-690T With welding device can join EVA or PE into a roll for loop splitting.

Model: ZT-SM-601 Feeding roller speed is controlled by firm and durable gearbox.

Model: ZT-TS-701 Available for installing automatic feeding device (after die-cut) into small piece.

Model: ZT-FC-N320 welding and joining EVA, PE, sponge sheets into roll by thermoelectric heat.

Model: ZT-KS-220T2/3/4 The wider space and cooling system for moulds This model, with the unique constructional design, can accommodate the moulds of bigger size. Besides, the cooling system can simplify the operation and perfect the products.

Model: ZT-KS-1920HC Mono rotary table design, Hot and cold mold switching rapidly, table parks and repeat precisely.

Model: ZT-KS-612D1/2/3 Utilizes high torque hydraulic motor to drive screw, the turning speed can be adjusted in accordance with the requirements of various materials.

Model: ZT-SM-690R Can load several sheets into machine to have continuous splitting in cycle. Save labor and time.

Model: SM-675 Changeable pattern roller.

Model: ZT-HC-368 Laminating EVA+EVA, EVA+film, EVA+carpet, EVA+surface pattern embossment

Model: ZT-FC-322 Splitting (skiving) PE or EVA sponges into layer roll after sponge sheets have been jointed into roll.

Model: ZT-KSC-9906E2 Low operation height, The operation height fits in with ergonomics.

Model: ZT-KSC-87C6HP Six stations use one hydraulic system, energy efficient.

Model: ZT-SM-690C Automatic reciprocating and forward splitting, Saves transfer time of raw material. Increases productivity

Model: ZT-SM-690 EVA, PE, RUBBER, SBR, CR, EPDM…etc. splitting.

Model: ZT-SM-635 Motorized height adjustment of upper and lower feeding rollers.

Model: ZT=HC-358 Lamination EVA or PE material, Increasing raw material block thickness

Model: ZT-MC-963 Cool down EVA, PVC, Rubber material to room temperature about 30 ºC